Colt Canada Integrated Upper Receiver (IUR) 15.7" & 10.5" PRE-ORDER w/ FREE SHIPPING!

http://www.canadiangunnutz.com/forum...1&d=1474663126
Colt Canada Integrated Upper Receiver (IUR) - 15.7"
CA$1,779.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/...l#.V-qh-5MrKi5

http://www.canadiangunnutz.com/forum...2&d=1474663185
Colt Canada Integrated Upper Receiver (IUR) - 10.5"
CA$1,699.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/...l#.V-qiJpMrKi5

*NEW VERSION*** Colt Canada IUR

Colt Canada British Special Special Forces 3rd Gen Integrated Upper Receiver’s

Production units to ship to British Special Forces in 2017 – THESE ARE NOT SURPLUS OR OVER RUNS*


DESCRIPTION:

• GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
• Made for the British Special Forces
• Interchangeable fit on all Mil-Spec “push pin" lowers
• Fully floating barrel system
• Dry film lubricated bolt carrier channel
• Screw retained (easily maintained) low profile gas block (under the handguard for safety)
• Mil-Spec hard anodized black
• IUR is marked COLT CANADA 2C085 and NATO on the rail
• Straight gas tube to increase life and ease of installation

BARREL:

• Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel
• Canadian Forces Spec thicker chrome
• Phosphated to Mil-Spec
• Improved integral forged carbine chamber
• Colt Canada hammer forged choke bore
• 1/7” twist RH/ 6 groove NATO approved bore
• Batch marked barrel and barrel extension
• High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec
• Anti-corrosion coating applied under the handguards
• New liner to improve thermal protection of hands

FLASH HIDER:

• Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.

RAILS:

• Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom)
• Reinforced grenade launcher recoil lug
• The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
• Rail slots are numbered with laser engraving
• The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories
• Protected low profile gas block
• IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches

BOLT CARRIER ASSEMBLY:

• Full Canadian Forces specification (Military configuration) bolt carrier assembly
• Proof tested, MPI inspected, and lot number controlled bolt
• CF spec high retention staking of the carrier key
• Chrome lined carrier and key for wear resistance
• Chromed firing pin

COLT CANADA TACTICAL CHARGING HANDLE:

• Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place
• Solid latch pin is permanently staked in place for worry free operations
• Mil-Spec finishes applied for weather resistance

COMES WITH with a bolt carrier group or charging handle.