Check us out-adapters for m14 stock

[jv1]

Check us out
we produce adapters for m14 rifle stock , which enables installation of ar 15 stocks and grips of your choice, on the original modified stock(patent pending).
Adapter is made of 6061 aluminum and black anodized.
more info you can find on our web

mandmini14.com

To get better idea of concept itself ,go to "adapters" page and click on"installation instructions".
The price of the adapter is 120$(can)+ tax and shipping

jv1

M&mini14 adapters
[email protected]

[lone-wolf]

Welcome to the forum, just curious if you do the work on any of the stocks yourself?
As in, customer sends you his stock, and it comes back with the adapter? Probably be a decent demand for such service.

[jv1]

I personally do not do any machining.The shop which produces adapters for me ,cut the stocks for me and than I just applied the epoxy and finished the assembly(I have 20 + years in aircraft maintenance .
Any machining and assembly should be done by gunsmith.
Any work on stock CAN NOT be done by hand or hand held power tools.
If the demand is there I will check the rate for machining of the stocks.More stocks to be machined lower the charge(price ) will be.But as I said I strongly recommend (and my lawyer too)that work and assembly is done by gunsmith.

[Billythreefeathers]

Any pictures?

[jv1]

Pictures coming soon....
On the web page mandmini14.com go to "adapters" page and click on "installation instruction" -lots of pictures
jv1

[Eddmac]

Looks good and I don't see any reason why that couldn't be a DIY job, with standard tools - I would feel perfectly capable and comfortable doing that myself, although I understand that you must cover yourself legally.

[jv1]

Hi Ed
This was my DIY project and than I came up with this idea.
If you have at least mitre saw and drill press and a lots of experience it is not difficult to cut and drill the stock ,If you use the original stock.
If you buy used stock
it is not just about cutting and drilling the stock- the rifle has to be fitted in to the stock.Mag has to fit properly and trigger assembly has to fit in just right.It is safety issue, it is not "legall"issue.That is a job for an experienced person.
jv1

[jv1]

As lone wolf suggested,
I have checked -the cutting and drilling of the stock ,on CNC operated router,will be available.
I have to have mounting fixture made,so it is going to take some time(probably a week or so).
The charge ,I was promised, should be 20$ per stock done.
This way, I am pretty confident that if original rifle stock is used ,installation of adapter can be done right.
jv1

[jv1]

FullSizeRender-3.jpgFullSizeRender-2.jpg

[lone-wolf]

That looks good!