Colt Canada Integrated Upper Receiver (IUR) - 15.7"
CA$1,779.95 + FREE SHIPPING!!!
Pre-Order at:
http://www.firearmsoutletcanada.com/...l#.V-qh-5MrKi5


Colt Canada Integrated Upper Receiver (IUR) - 10.5"
CA$1,699.95 + FREE SHIPPING!!!
Pre-Order at:
http://www.firearmsoutletcanada.com/...l#.V-qiJpMrKi5

*NEW VERSION*** Colt Canada IUR


Colt Canada British Special Special Forces 3rd Gen Integrated Upper Receiver’s

Production units to ship to British Special Forces in 2017 – THESE ARE NOT SURPLUS OR OVER RUNS*



DESCRIPTION:


  • GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
  • Made for the British Special Forces
  • Interchangeable fit on all Mil-Spec “push pin" lowers
  • Fully floating barrel system
  • Dry film lubricated bolt carrier channel
  • Screw retained (easily maintained) low profile gas block (under the handguard for safety)
  • Mil-Spec hard anodized black
  • IUR is marked COLT CANADA 2C085 and NATO on the rail
  • Straight gas tube to increase life and ease of installation



BARREL:

  • Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel
  • Canadian Forces Spec thicker chrome
  • Phosphated to Mil-Spec
  • Improved integral forged carbine chamber
  • Colt Canada hammer forged choke bore
  • 1/7” twist RH/ 6 groove NATO approved bore
  • Batch marked barrel and barrel extension
  • High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec
  • Anti-corrosion coating applied under the handguards
  • New liner to improve thermal protection of hands




FLASH HIDER:


  • Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.



RAILS:


  • Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom)
  • Reinforced grenade launcher recoil lug
  • The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
  • Rail slots are numbered with laser engraving
  • The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories
  • Protected low profile gas block
  • IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches




BOLT CARRIER ASSEMBLY:

  • Full Canadian Forces specification (Military configuration) bolt carrier assembly
  • Proof tested, MPI inspected, and lot number controlled bolt
  • CF spec high retention staking of the carrier key
  • Chrome lined carrier and key for wear resistance
  • Chromed firing pin




COLT CANADA TACTICAL CHARGING HANDLE:

  • Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place
  • Solid latch pin is permanently staked in place for worry free operations
  • Mil-Spec finishes applied for weather resistance



COMES WITH with a bolt carrier group or charging handle.