FirearmsOutletCanada
09-27-2016, 10:48 AM
http://www.canadiangunnutz.com/forum/attachment.php?attachmentid=67951&d=1474663126
Colt Canada Integrated Upper Receiver (IUR) - 15.7"
CA$1,779.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/new-version-colt-canada-integrated-upper-receiver-iur-15-7.html#.V-qh-5MrKi5
http://www.canadiangunnutz.com/forum/attachment.php?attachmentid=67952&d=1474663185
Colt Canada Integrated Upper Receiver (IUR) - 10.5"
CA$1,699.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/new-version-colt-canada-integrated-upper-receiver-iur-10-5.html#.V-qiJpMrKi5
*NEW VERSION*** Colt Canada IUR
Colt Canada British Special Special Forces 3rd Gen Integrated Upper Receiver’s
Production units to ship to British Special Forces in 2017 – THESE ARE NOT SURPLUS OR OVER RUNS*
DESCRIPTION:
GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
Made for the British Special Forces
Interchangeable fit on all Mil-Spec “push pin" lowers
Fully floating barrel system
Dry film lubricated bolt carrier channel
Screw retained (easily maintained) low profile gas block (under the handguard for safety)
Mil-Spec hard anodized black
IUR is marked COLT CANADA 2C085 and NATO on the rail
Straight gas tube to increase life and ease of installation
BARREL:
Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel
Canadian Forces Spec thicker chrome
Phosphated to Mil-Spec
Improved integral forged carbine chamber
Colt Canada hammer forged choke bore
1/7” twist RH/ 6 groove NATO approved bore
Batch marked barrel and barrel extension
High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec
Anti-corrosion coating applied under the handguards
New liner to improve thermal protection of hands
FLASH HIDER:
Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.
RAILS:
Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom)
Reinforced grenade launcher recoil lug
The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
Rail slots are numbered with laser engraving
The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories
Protected low profile gas block
IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches
BOLT CARRIER ASSEMBLY:
Full Canadian Forces specification (Military configuration) bolt carrier assembly
Proof tested, MPI inspected, and lot number controlled bolt
CF spec high retention staking of the carrier key
Chrome lined carrier and key for wear resistance
Chromed firing pin
COLT CANADA TACTICAL CHARGING HANDLE:
Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place
Solid latch pin is permanently staked in place for worry free operations
Mil-Spec finishes applied for weather resistance
COMES WITH with a bolt carrier group or charging handle.
Colt Canada Integrated Upper Receiver (IUR) - 15.7"
CA$1,779.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/new-version-colt-canada-integrated-upper-receiver-iur-15-7.html#.V-qh-5MrKi5
http://www.canadiangunnutz.com/forum/attachment.php?attachmentid=67952&d=1474663185
Colt Canada Integrated Upper Receiver (IUR) - 10.5"
CA$1,699.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/new-version-colt-canada-integrated-upper-receiver-iur-10-5.html#.V-qiJpMrKi5
*NEW VERSION*** Colt Canada IUR
Colt Canada British Special Special Forces 3rd Gen Integrated Upper Receiver’s
Production units to ship to British Special Forces in 2017 – THESE ARE NOT SURPLUS OR OVER RUNS*
DESCRIPTION:
GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
Made for the British Special Forces
Interchangeable fit on all Mil-Spec “push pin" lowers
Fully floating barrel system
Dry film lubricated bolt carrier channel
Screw retained (easily maintained) low profile gas block (under the handguard for safety)
Mil-Spec hard anodized black
IUR is marked COLT CANADA 2C085 and NATO on the rail
Straight gas tube to increase life and ease of installation
BARREL:
Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel
Canadian Forces Spec thicker chrome
Phosphated to Mil-Spec
Improved integral forged carbine chamber
Colt Canada hammer forged choke bore
1/7” twist RH/ 6 groove NATO approved bore
Batch marked barrel and barrel extension
High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec
Anti-corrosion coating applied under the handguards
New liner to improve thermal protection of hands
FLASH HIDER:
Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.
RAILS:
Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom)
Reinforced grenade launcher recoil lug
The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
Rail slots are numbered with laser engraving
The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories
Protected low profile gas block
IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches
BOLT CARRIER ASSEMBLY:
Full Canadian Forces specification (Military configuration) bolt carrier assembly
Proof tested, MPI inspected, and lot number controlled bolt
CF spec high retention staking of the carrier key
Chrome lined carrier and key for wear resistance
Chromed firing pin
COLT CANADA TACTICAL CHARGING HANDLE:
Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place
Solid latch pin is permanently staked in place for worry free operations
Mil-Spec finishes applied for weather resistance
COMES WITH with a bolt carrier group or charging handle.