PDA

View Full Version : Check us out-adapters for m14 stock



jv1
07-10-2017, 09:44 AM
Check us out
we produce adapters for m14 rifle stock , which enables installation of ar 15 stocks and grips of your choice, on the original modified stock(patent pending).
Adapter is made of 6061 aluminum and black anodized.
more info you can find on our web

mandmini14.com

To get better idea of concept itself ,go to "adapters" page and click on"installation instructions".
The price of the adapter is 120$(can)+ tax and shipping

jv1

M&mini14 adapters
[email protected]

lone-wolf
07-10-2017, 10:14 AM
Welcome to the forum, just curious if you do the work on any of the stocks yourself?
As in, customer sends you his stock, and it comes back with the adapter? Probably be a decent demand for such service.

jv1
07-10-2017, 11:35 AM
I personally do not do any machining.The shop which produces adapters for me ,cut the stocks for me and than I just applied the epoxy and finished the assembly(I have 20 + years in aircraft maintenance .
Any machining and assembly should be done by gunsmith.
Any work on stock CAN NOT be done by hand or hand held power tools.
If the demand is there I will check the rate for machining of the stocks.More stocks to be machined lower the charge(price ) will be.But as I said I strongly recommend (and my lawyer too)that work and assembly is done by gunsmith.

Billythreefeathers
07-13-2017, 04:28 PM
Any pictures?

jv1
07-13-2017, 07:31 PM
Pictures coming soon....
On the web page mandmini14.com go to "adapters" page and click on "installation instruction" -lots of pictures
jv1

Eddmac
07-14-2017, 09:25 AM
Looks good and I don't see any reason why that couldn't be a DIY job, with standard tools - I would feel perfectly capable and comfortable doing that myself, although I understand that you must cover yourself legally.

jv1
07-14-2017, 04:38 PM
Hi Ed
This was my DIY project and than I came up with this idea.
If you have at least mitre saw and drill press and a lots of experience it is not difficult to cut and drill the stock ,If you use the original stock.
If you buy used stock
it is not just about cutting and drilling the stock- the rifle has to be fitted in to the stock.Mag has to fit properly and trigger assembly has to fit in just right.It is safety issue, it is not "legall"issue.That is a job for an experienced person.
jv1

jv1
07-17-2017, 07:09 PM
As lone wolf suggested,
I have checked -the cutting and drilling of the stock ,on CNC operated router,will be available.
I have to have mounting fixture made,so it is going to take some time(probably a week or so).
The charge ,I was promised, should be 20$ per stock done.
This way, I am pretty confident that if original rifle stock is used ,installation of adapter can be done right.
jv1

jv1
08-09-2017, 04:27 PM
31603161

lone-wolf
08-09-2017, 04:33 PM
That looks good!

jv1
08-09-2017, 05:21 PM
Here are few more pictures
316231633164

Billythreefeathers
08-11-2017, 03:53 PM
I see some gunsmithing in my future ;)

jv1
10-27-2017, 05:27 PM
Hi guys
i have some very good news for all of you interested in m14 adapter installed on rifle.Wild west shooting centre has installed one of the adapters on to the m305a(7.62x39) rifle .It is listed on their web page(gun-shop.ca).
jv14592

jv1
03-25-2018, 08:52 AM
6847

jv1
03-25-2018, 08:55 AM
Now these are available from valleyguns.com from Petawawa
contact Jeff Smith

jv1
03-30-2018, 06:07 PM
69146915

jv1
03-30-2018, 06:09 PM
I was finally able to get real GI m14 stock.Here are few rough pictures .OMG it fits like a glove.

jv1
03-30-2018, 06:10 PM
69166917

JustBen
03-30-2018, 07:56 PM
Nice. Now if you had a source for USGI fibreglass stocks to go with...

jv1
04-01-2018, 11:05 AM
Hi Ben
that is good one
But in all seriousness that was the second thing I did after cutting norinco stock.I got GI fiberglass stock.
First it is more narrow than norinco or wood GI.
6971
That would not be a problem -my machinist would just make adaapter more narrow,which is more perfect,becouse the adapter would be smaller and ligter.

jv1
04-01-2018, 11:10 AM
When I cut the stock, I realized it is not solid like wood stocks.It did not have thick wall like norinco stocks.It is hollow with very thin" walls "and it is filled with some softer material.The stock material is very strong but brittle.I am afraid that after prolonged use these "walls "would crack so I gave up on the idea of using GI fiberglass stock.69736974

jv1
04-01-2018, 01:53 PM
Here is GI stock painted black69756976

jv1
04-02-2018, 06:38 PM
Here are few pictures of rifle and stock with folding adapter insatalled
6996
6997
6995

jv1
04-02-2018, 06:43 PM
7001
7002
7003

jv1
04-02-2018, 07:21 PM
7004

Specter Arms
05-24-2018, 08:56 PM
Is there a dealer program for these? MOQ?

jv1
05-26-2018, 04:12 PM
private message sent

jv1
06-12-2018, 10:28 AM
Many people asked about slimmer profile of the adapter -so here is prototype.

jv1
06-12-2018, 10:29 AM
8107

jv1
06-12-2018, 10:30 AM
8108

jv1
06-12-2018, 10:30 AM
8109

jv1
06-12-2018, 10:30 AM
8110

jv1
06-12-2018, 10:31 AM
8111

jv1
08-18-2018, 06:18 PM
Hi guys
i have stumbled upon limited number of M14 USGI Fayen NM stocks.They come without metal ,in like new condition and wood needs to be finished(after bedding).
Would anybody be interested in these stocks?8859

jv1
11-22-2018, 05:34 PM
Hi everybody
i would like to ask what is your opinion on knivsmed stromeng knives from Norway?They are sami knives built for use for rain deer herders in northern Norway,Sweden and Finland.Here are few pictures of Norweigan army special forces.10191

jv1
11-22-2018, 05:35 PM
10192
10193