PDA

View Full Version : Came with an SKS..



Joshua13
12-05-2018, 09:30 PM
What is this nifty Lil guy used for? Came with my Chinese SKS (from marstar right now price of $209)

Also the pin that holds extractor/firing pin is not coming out with any amount of pounding any suggestions? https://uploads.tapatalk-cdn.com/20181206/48bb13628fabaa95bea4135643156187.jpg

Sent from my E6560T using Tapatalk

DuhBoredShooter
12-05-2018, 09:42 PM
The pin that holds mine is jammed as well, cant get it out

Sent from my SM-G935F using Tapatalk

RobertMcC
12-05-2018, 09:44 PM
First time I ever seen a SKS come with that...

Not much I could find about it..

http://www.yooperj.com/SKS-17.htm


The AK kit has a combination tool (screwdriver/front sight tool/punch/jag wrench)

JustBen
12-05-2018, 09:54 PM
After you run out of spam can ammo and the bayonet breaks, that's what you use to dispatch the enemy.

srdiver
12-05-2018, 10:18 PM
What is this nifty Lil guy used for? Came with my Chinese SKS (from marstar right now price of $209)

Also the pin that holds extractor/firing pin is not coming out with any amount of pounding any suggestions?

Sent from my E6560T using Tapatalk

hit it harder

Rory McCanuck
12-05-2018, 11:15 PM
hit it harder

Pretty much the only repair instructions you need for any Russian equipment.

Sinbad
12-06-2018, 12:51 AM
That's a pretty crude screw driver but I guess it will do.

FALover
12-06-2018, 05:21 AM
Pretty much the only repair instructions you need for any Russian equipment.

https://www.youtube.com/watch?v=dEkOT3IngMQ

DuhBoredShooter
12-06-2018, 06:21 PM
now that I look at it it looks like you might be able to adjust the windage on the front sight with it if you can fit it inside.

Old Dirty Grandpa
12-13-2018, 02:45 PM
Pin on your bolt will come out, proper size punch, heavy hammer, and metal backing with recessed hole for pin. Hold the punch with vice grips for safety and hit it hard!!!

Hidyn
12-13-2018, 05:25 PM
Gently heating the bolt might help with the pin. Don't get it red hot or anything, but if it's just stuck that will help.

SwissArmyMan
12-14-2018, 09:08 AM
It's the grease that binds that pin. As said heat it.