-
BIG THANKS TO MARSHALL, a long overdued post!! loads of goodies
-
That's a funky looking brake!
-
My me My! That's a sweet load of goodies there bud :) Who is this 'marshall' fella, and how do you get to be his friend? :)
-
Building a single shot AR pistol ?
-
Quote:
Originally Posted by
short1
Building a single shot AR pistol ?
I'm building a 9mm AR that takes glock mags, still waiting on the QC10 lower :)
upper is done:bananna: I used a different hand-guard, looked better.
http://i1357.photobucket.com/albums/...psp0wy6t90.jpg
-
How does the gas system work on that ? Or is it blowback, Like a 10/22 ?
-
Nice haul, good looking upper build too.
-
Thanks lone wolf, I'm stoked and can't wait for the lower to arrived for this puppy:)
Quote:
Originally Posted by
short1
How does the gas system work on that ? Or is it blowback, Like a 10/22 ?
correct, direct blowback just like 10/22.
-
I sincerely hope you install an NEA CCS stock on that bad boy.
http://img.photobucket.com/albums/v6...ps1bc75a3e.jpg
-
Quote:
Originally Posted by
bettercallsaul
I sincerely hope you install an NEA CCS stock on that bad boy.
sadly my friend, that NEA stock won't work with my upper, the NEA has a proprietary bcg not compatible with my 9mm bolt, that stock was my first choice!! but after looking into it, I was told no sadly.
my second choice is this, LWRC UCIW
http://www.ar15.com/media/mediaFiles/26639/57716.JPG
not too shabby either, the buffer that came with this LWRC stock won't work with 9mm either but there is an aftermarket replacement buffer for this stock, or I could use a H3 buffer so I was told.
-
Very nice! Would love to hear your opinion of the QC10 lower when it arrives. That lower is specifically designed for Glock mags, yes? No weird mag blocks or anything? I don't know a lot about 9mm LPKs, are non-milspec triggers available? Never seen that brake before, unique! And completely unrelated to all the cool stuff on display:), I like the idea of using those foam rubber mats for gun part protection.
-
Quote:
Originally Posted by
Familygunnutz
sadly my friend, that NEA stock won't work with my upper, the NEA has a proprietary bcg not compatible with my 9mm bolt, that stock was my first choice!! but after looking into it, I was told no sadly.
my second choice is this, LWRC UCIW
not too shabby either, the buffer that came with this LWRC stock won't work with 9mm either but there is an aftermarket replacement buffer for this stock, or I could use a H3 buffer so I was told.
That's a bummer, but you made a good second choice. It'll be a nice gun.
-
Quote:
Originally Posted by
Strewth
Very nice! Would love to hear your opinion of the QC10 lower when it arrives. That lower is specifically designed for Glock mags, yes? No weird mag blocks or anything? I don't know a lot about 9mm LPKs, are non-milspec triggers available? Never seen that brake before, unique! And completely unrelated to all the cool stuff on display:), I like the idea of using those foam rubber mats for gun part protection.
I would definitely make a post for QC10 when it arrives, Aztech/Marshall is getting a FRT number assigned to it at the moment.
QC10 has small frame lowers for glock 9/40/357 sig, large frame lowers for glock 45, they also have lowers for colt patterned mags. no weird mag block and is the best looking lower around imho.
the lower accepts any AR triggers.
the brake is awesome! unique and effective, it's sitting on my .223 AR and it tames flashes and muzzle jump without ringing your ears :) love it
-
Quote:
Originally Posted by
Familygunnutz
I would definitely make a post for QC10 when it arrives, Aztech/Marshall is getting a FRT number assigned to it at the moment.
So the lower is probably going to be "restricted" of course ?. Too bad one couldn't make a NR 9mm "carbine" with a legal length barrel.
-
Quote:
Originally Posted by
short1
So the lower is probably going to be "restricted" of course ?. Too bad one couldn't make a NR 9mm "carbine" with a legal length barrel.
sadly yes, it will be as it's AR variant,
there are NR 9mm/45 Carbines already thou,
Theron defense or JR carbines both are NR.
I wanted something more pleasing to the eye:) and has full AR controls.
-
Quote:
Originally Posted by
Familygunnutz
I would definitely make a post for QC10 when it arrives, Aztech/Marshall is getting a FRT number assigned to it at the moment.
QC10 has small frame lowers for glock 9/40/357 sig, large frame lowers for glock 45, they also have lowers for colt patterned mags. no weird mag block and is the best looking lower around imho.
the lower accepts any AR triggers.
the brake is awesome! unique and effective, it's sitting on my .223 AR and it tames flashes and muzzle jump without ringing your ears :) love it
Cool, glad to hear the FRT is coming along; we could use more options for 9mm ARs up here. Those Qc lowers do look cool:). I thought 9mm ARs needed a different hammer? Am I dating myself?
Glad to hear the brake works, it's hard to choose with all the muzzle device options claiming to do everything these days.
-
Quote:
Originally Posted by
Strewth
Cool, glad to hear the FRT is coming along; we could use more options for 9mm ARs up here. Those Qc lowers do look cool:). I thought 9mm ARs needed a different hammer? Am I dating myself?
Glad to hear the brake works, it's hard to choose with all the muzzle device options claiming to do everything these days.
as long as you get a ramped 9mm bolt you can use any hammer, if you happened to have a non-ramped bolt then you will need a rounded hammer, or grind down the notch on the hammer, or have the bolt ramped.
ramped bolt is way to go.
also the bolt need to have a glock "cut" for working with glock magazines.
I wanted a brake similar to KAC MAMS without the crazy cost, someone owns a KAC MAMS tried this EFAB and he swears they preformed the same, good enough for me:)
-
Update on the QC10... it was submitted for FRT and rejected due to the fact that it is manufactured with a "low shelf". Meaning it would accept a RDIAS to easily make it a full auto. I then conveyed this information to Quarter Circle 10 and they are now in the process of making some "high shelf" (semi-auto only) versions with different serial numbering for us Canadians. We expect to have the new receivers in hand sometime in June and will resubmit as soon as we have them. In conversations with the Firearms Tech at the CFO it has been indicated that there should be no further delays once we have the issue corrected. And yes, sadly OP is correct... they will be restricted.
As for the EFAB brake... get yours here: http://www.aztecharmory.com/precisio...e-p-26275.html It's available in 7.62 as well. We have full access to all Precision Armament products. They're not all loaded into our catalog yet, but check them out at: http://precisionarmament.com/ Send me a link to whatever you want and we'll get it set up for you to make the purchase through our site.
-
Further update on QC10... all approvals are in place and we have some coming on our August import. All are spoken for except one Glock Large Frame receiver, but we're taking orders.
-
-
-
Thanks Marshall!
a Small note from Chris from QC10
"Hello Ben,
Our bolt does not work with the 3 gun triggers from geissele. Most of their triggers simply don't work in these blowback bolts the spring to reset the hammer is far too heavy and the hammer profile does not match up to the ramping of the bolts well. If you're looking for a nice trigger talk to someone at CMC triggers for their 3.5 that I know people are using on these Pistol Caliber Carbines.
Chris
QC10 "
so guys make sure you dont use the geissele triggers when using any 9mm ramped bolts, any milspec or CMC triggers are gtg. oh btw, KIC 33rd mag absolutely DOES NOT work with this lower lol glock factory mags are solid.
-
Quote:
Originally Posted by
Familygunnutz
I'm not sure I would ever be able to take my hands off that
-
Waiting for my first order from Marshall. It's coming in on the 15 September, import. Should be in my hands by around the 25th. I'll post reviews and photos asap. They have been very good at keeping me "in the loop". Not sure if that is good or bad, but it's certainly keeping my excitement factor up. ;D
-
Quote:
Originally Posted by
lone-wolf
I'm not sure I would ever be able to take my hands off that
she is the new Queen :) for sure.
-
Quote:
Originally Posted by
Edenchef
Waiting for my first order from Marshall. It's coming in on the 15 September, import. Should be in my hands by around the 25th. I'll post reviews and photos asap. They have been very good at keeping me "in the loop". Not sure if that is good or bad, but it's certainly keeping my excitement factor up. ;D
Marshall will take good care of you, and the wait will be worth it. I love it, there is always something to look forward to in the mail, it's like Christmas every couple of months lol
-
Quote:
Originally Posted by
Familygunnutz
Marshall will take good care of you, nothing to worry about.
I'm not worried about him at all.
-
Got the email from Carol Ann last night. Transfer is complete, my new toys will be in the mail today. Oooo I'm so excited. Yes, when it involves waiting for new guns.... "men will be boys". Thanks to Marshall, Carol Ann, and all the others behind the scenes at Aztech, first time importing, process was smooth and seamless. I will definitely do this with Aztech again. Pictures will follow.
