Results 1 to 8 of 8
  1. #1
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,385

    cz 858 feed issue

    First I need to mention I am using a samsung cell phone to post but ill do my best.

    I have a used cz 858 that I bought off a chap at cgn. It was also modified to use the xcr micro pistol mags. Which I have 10 of as well as the original mags and all the hadware to interchange. Wooot.

    The feed issue is 2 fold. The first is that the lower bullet gets hung up in front of the feed ramp and may end up pushing the bullet deeper into the case.

    The second is that the bullet may get jammed between the mag and entering the muzzle chamber.

    The feed ramp itself looks either worn out or altered via dremmel. But im no gun smith. I have pics attached and the pics were taken with up most caution.

    http://www.flickr.com/photos/34886737@N03/12659502923/

    http://www.flickr.com/photos/34886737@N03/12659502563/

    http://www.flickr.com/photos/34886737@N03/12659501943/


    http://www.flickr.com/photos/34886737@N03/12659501923/

    Thanks
    MΟΛΩΝ ΛΑΒΕ

  2. #2
    Senior Member Satain's Avatar
    Join Date
    Apr 2012
    Posts
    3,392
    magazine is not sitting in the correct position.
    3rd link shows why you are having this issue.

  3. #3
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,385
    Ill need a bit more info, the mag is seated as snug as its going to get
    MΟΛΩΝ ΛΑΒΕ

  4. #4
    Senior Member Satain's Avatar
    Join Date
    Apr 2012
    Posts
    3,392
    Yes but not in the proper location. Call Wolverine Supplies and ask for Wolfgang to take a look at it.
    Not something that anyone can fix. Will take proper tools and know how.

  5. #5
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,385
    Will do. Thanks for the input
    MΟΛΩΝ ΛΑΒΕ

  6. #6
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,385
    ok the good news is that with a heavy cleaning, including xcr mags... the 10 round mags cycle fine. but like Satain said. something is not right with the original mags... they sit way below the feed ramp. ill be sticking with the xcr's.
    MΟΛΩΝ ΛΑΒΕ

  7. #7
    Senior Member Satain's Avatar
    Join Date
    Apr 2012
    Posts
    3,392
    Sweet cause honestly who shoots 5 rounders when you can shoot 10 rounders???

  8. #8
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,385
    Quote Originally Posted by Satain View Post
    Sweet cause honestly who shoots 5 rounders when you can shoot 10 rounders???
    ya i came to the conclusion that the double mag looks just as badass as the original and it works, plus i have 8 more mags... why fix something that didnt need a ton of fixing.
    MΟΛΩΝ ΛΑΒΕ

Similar Threads

  1. Pig Feed Formula Advice Please
    By BruceW in forum Prepping for the future
    Replies: 15
    Last Post: 01-02-2017, 07:26 PM
  2. Feed the 45 ACP or the 762x25?
    By RobertMcC in forum Factory Ammo
    Replies: 11
    Last Post: 02-24-2016, 01:49 PM
  3. SKS Feed Issues?
    By VancouverSkiBum in forum Soviet Bloc Rifles
    Replies: 16
    Last Post: 07-03-2015, 04:31 AM
  4. SKS feed issues???
    By Hungo in forum Soviet Bloc Rifles
    Replies: 20
    Last Post: 08-09-2014, 02:01 PM
  5. Howard Feed-N-Wax
    By Prairie Dog in forum Gunsmithing and Cleaning
    Replies: 4
    Last Post: 08-24-2013, 09:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •