Quarter Circle 10

[Marshall]

We now have access to QuarterCircle10 products available for import into Canada.

We are working on getting them loaded into our catalog, but here's a link to their site for now: http://www.qcircle10.com/

You can order anything you see there through us, just give us a call or email and let us know what you need. Prices will be the same as what you see on their site.

Thanks for your interest and let me know if you have any questions.

[jwirecom109]

So the Colt 1911 Lower is for 1911 magazine design?

[Marshall]

They use Colt SMG magazines... basically an Uzi mag modified to hold the bolt open after the last shot. MatalForm brand seem to be the most common, but there are a few companies making them now.

[Marshall]

As some of you are aware, we were delayed a bit on the QC10 receivers. The CFO denied our initial application for an FRT number due to the fact that they were milled as "low shelf", meaning they would accept a DIAS which unfortunately is not allowed here.
With that said, many thanks to QC10 for recognizing the value of the Canadian market and re-tooling to make a high shelf version just for us. We now have the FRT number and are bringing some lowers in on our August import. As of now, all but one Glock Large Frame are spoken for but we are happy to take orders for the September import.
Thanks again to all of you who have been patient with us through the process.

[Mark-II]

Interesting. The 5 round limit of the Uzi mags made a 9mm pistol carbine a non starter for me before this

[Marshall]

Check out QC10 on Instagram https://instagram.com/p/6Pw86rNJwQ/

[Marshall]

Interesting. The 5 round limit of the Uzi mags made a 9mm pistol carbine a non starter for me before this

The GSF is the way to go. These are very well made receivers with all small proprietary part included. You will want to get the glock cut bolt with it for last round hold open. We have barrels available too... check out www.quartercircle10.com

[Marshall]

Success!! QC10 Lowers are officially here in Canada. Thanks to all who have ordered and waited. Your patience is very much appreciated.

[Familygunnutz]

Pics says it all, THANK YOU Marshall!! as always.









the fake suppressor is temporary, acting as a thread protector until I find a suitable good looking 9mm flash hider.
the fake Spike's suppressor is also meant to be slip on over the barrel, but the bull barrel profile is to thick so I just turned it around.

[Familygunnutz]

a Small note, this is from Chris from QC10

"Hello Ben,

Our bolt does not work with the 3 gun triggers from geissele. Most of their triggers simply don't work in these blowback bolts the spring to reset the hammer is far too heavy and the hammer profile does not match up to the ramping of the bolts well. If you're looking for a nice trigger talk to someone at CMC triggers for their 3.5 that I know people are using on these Pistol Caliber Carbines.

Chris
QC10 "

so guys make sure you don't use the geissele triggers when using any 9mm ramped bolts, any milspec or CMC triggers are gtg.

oh btw, KIC 33rd mag absolutely DOES NOT work with this lower lol glock factory mags are solid.

[BadRonin]

I have been looking for a 9mm sub style gun for a long time.
I have been dreaming of the day that the B&T ACP9 or Sig MPX9 would be allowed in Canada...alas that day may never come.
I didn't even know you existed until I saw a post on IG of a beauty Circle 10 which took 9mm Glock mags.

Now I'm on the hunt for one of these!

1)How can I get one of these into Canada and what (ballpark am I looking to spend on a 9mm Glock version w 7.5 in barrel and lite keymod Handguard?

2) can they be made fully ambi?

3) will the mags be pinned to 10? Or 5?

4) what kind of timeline am I looking at and can I pay with anything other than a CC? Like PayPal or etransfer?

And finally... Who should I contact?

Thanks in advance if you can provide answers to these questions.
I'm really looking forward to getting my dirty little mits on one of these bad girls....

Rōnin

[Marshall]

I have been looking for a 9mm sub style gun for a long time.
I have been dreaming of the day that the B&T ACP9 or Sig MPX9 would be allowed in Canada...alas that day may never come.
I didn't even know you existed until I saw a post on IG of a beauty Circle 10 which took 9mm Glock mags.

Now I'm on the hunt for one of these!

1)How can I get one of these into Canada and what (ballpark am I looking to spend on a 9mm Glock version w 7.5 in barrel and lite keymod Handguard?

2) can they be made fully ambi?

3) will the mags be pinned to 10? Or 5?

4) what kind of timeline am I looking at and can I pay with anything other than a CC? Like PayPal or etransfer?

And finally... Who should I contact?

Thanks in advance if you can provide answers to these questions.
I'm really looking forward to getting my dirty little mits on one of these bad girls....

Rōnin

We have some lowers in stock in BC now. Some 5.5" barrels and Odin Works handguards too. Waiting for bolts and 7.5 barrels but should he getting more on the May import.
We can take EMT for payment...total price really depends on the build
Mags are 10rd Glock pistol mags
Give me call or email anytime and I can give you more details.
844-357-3030 [email protected]

[BadRonin]

Thanks a lot Marshall.
I shall be calling you soon to order and discuss build.
Cheers!

Rōnin