Page 1 of 4 1234 LastLast
Results 1 to 10 of 35

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    www.aztecharmory.ca
    Join Date
    Dec 2014
    Location
    Penticton BC
    Posts
    330

    No More Rivets for Pmags!

    We are happy to announce that from now on all Magpul Pmags sold to Canada by Aztech Armory will be internally blocked to allow for complete dis-assembly... No more Rivets!!

    We are working on internal blocks for other mags as well.
    So far we have XDm and PPQ blocks with more to come soon. Eventually we hope to eliminate the use of rivets entirely.
    Last edited by Marshall; 06-09-2015 at 07:09 PM.
    It's Not Always a Matter of Need...

  2. The Following 8 Users Like This Post By Marshall

    CaperJim (06-09-2015), DOA (06-09-2015), Gunexpert007 (06-09-2015), knuckledragger (06-09-2015), lone-wolf (06-24-2015), rhyno857 (09-17-2015), Strewth (06-24-2015), Waynetheman (07-10-2015)

  3. #2
    Senior Member Doug_M's Avatar
    Join Date
    Feb 2013
    Location
    Nova Scotia
    Posts
    16,046
    That is fantastic! Any chance you'll get 20 rounders internally blocked too?


    Sent from my iPad using Tapatalk
    Our freedoms ARE the greater good.

  4. #3
    www.aztecharmory.ca
    Join Date
    Dec 2014
    Location
    Penticton BC
    Posts
    330
    Quote Originally Posted by Doug_M View Post
    That is fantastic! Any chance you'll get 20 rounders internally blocked too?


    Sent from my iPad using Tapatalk
    Yes, 20 rd pmag blocks are ready...
    Working on the USGI blocks as well.
    It's Not Always a Matter of Need...

  5. #4
    Senior Member
    Join Date
    Jul 2012
    Posts
    123
    Quote Originally Posted by Marshall View Post
    Yes, 20 rd pmag blocks are ready...
    Working on the USGI blocks as well.
    I would definitely be in for a dozen of these.

  6. #5
    Senior Member
    Join Date
    Jul 2012
    Posts
    123
    Quote Originally Posted by Marshall View Post
    ...
    Working on the USGI blocks as well.
    Any further information on this Marshall? Thank you.

  7. #6
    www.aztecharmory.ca
    Join Date
    Dec 2014
    Location
    Penticton BC
    Posts
    330
    Quote Originally Posted by ponymusic View Post
    Any further information on this Marshall? Thank you.
    Hey, sorry for the delay on this. The 5/20 blocks are ready, but no word on the timing for the 5/30 ones. Truth is the guys we have working on it don't have any sense of urgency. We're discussing the possibility of making them ourselves, so I'll update on that front once we decide if that's a viable option.
    It's Not Always a Matter of Need...

  8. #7
    Senior Member
    Join Date
    Jul 2012
    Posts
    123
    Quote Originally Posted by Marshall View Post
    Hey, sorry for the delay on this. The 5/20 blocks are ready, but no word on the timing for the 5/30 ones. Truth is the guys we have working on it don't have any sense of urgency. We're discussing the possibility of making them ourselves, so I'll update on that front once we decide if that's a viable option.
    The 5/20 are what I am looking for, if these fit original Colt and US issue 20 round mags. The Colt mags (2) are are early 80's that came with my SP1 and the US mags (10) are Vietnam era surplus M16 mags. Thank you for your help Marshall. Take care.

  9. #8
    Senior Member
    Join Date
    Jul 2012
    Posts
    123
    Quote Originally Posted by Marshall View Post
    Hey, sorry for the delay on this. The 5/20 blocks are ready, but no word on the timing for the 5/30 ones. Truth is the guys we have working on it don't have any sense of urgency. We're discussing the possibility of making them ourselves, so I'll update on that front once we decide if that's a viable option.
    Hi Marshall, any eta on these?

  10. #9
    Go Canucks Go! lone-wolf's Avatar
    Join Date
    Apr 2012
    Location
    PEI
    Posts
    17,801
    How is it done exactly?
    the wild still lingered in him and the wolf in him merely slept

    "It must be poor life that achieves freedom from fear" - Aldo Leopold

  11. #10
    www.aztecharmory.ca
    Join Date
    Dec 2014
    Location
    Penticton BC
    Posts
    330
    Quote Originally Posted by lone-wolf View Post
    How is it done exactly?
    For the PMAGs a polymer block replaces the base plate retainer and extends up inside of the spring to limit the travel of the follower. You can remove the base plate and block just as you normally would and the follower and spring can then be completely removed.

    Pistol mags are just a polymer block epoxied to the underside of the follower or to the top of the base plate retainer, depending on the type of magazine.
    It's Not Always a Matter of Need...

  12. The Following User Liked This Post By Marshall

    lone-wolf (06-24-2015)

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •