Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Member
    Join Date
    May 2015
    Posts
    46

    Why do manual safeties make things so difficult?

    Another newbie question...

    I remember when I was taking the PAL course, I found it strange and frustrating that on many guns, if the safety was on, you couldn't open the action. At that time, it was mostly bolt-action rifles that I found that. Now that I have my first pistol, it's the same again: with the safety on, you can't pull back the slide.

    Why is that? I'd prefer to leave the safety on all the time, except when I'm about to fire it. Why do I have to take it off safety before I can check if it's loaded?

    - Ron

  2. #2
    Moderator kennymo's Avatar
    Join Date
    Jul 2014
    Location
    Winnipeg, MB
    Posts
    15,472
    Buy a different pistol? None of mine have a safety at all. Rifles too, depends on design. Many can be opened with the safety on, many have a three position lever that allows you to open the bolt with the safety on. I personally don't think it's a big deal, but I really don't like safties at all. The only ones I ever use are on shotguns while in the blind. Point the gun in a safe direction (which you should be doing anyway), flick it off and check the chamber. No worries.

  3. #3
    Go Canucks Go! lone-wolf's Avatar
    Join Date
    Apr 2012
    Location
    PEI
    Posts
    17,799
    On the xbolt, if the safety is on there is a button that pops up on the bolt handle you have to manipulate when opening the action.
    Seems over engineered for lawyers but kind of neat.

    Generally you can either blame lawyers or just plain poor design for bad safeties.
    the wild still lingered in him and the wolf in him merely slept

    "It must be poor life that achieves freedom from fear" - Aldo Leopold

  4. The Following User Liked This Post By lone-wolf

    Rory McCanuck (07-29-2015)

  5. #4
    Super Moderator Rory McCanuck's Avatar
    Join Date
    Apr 2012
    Location
    Middle of Manitoba
    Posts
    14,472
    That X-Bolt dealio is kinda cool.
    I like the mauser 3 position safety that'll let you cycle things while on safe.
    The half-cock notch on a Marlin or Winchester lever gun is my favourite. Better be careful unloading before getting in the truck

  6. #5
    Senior Member Steveo9mm's Avatar
    Join Date
    Nov 2013
    Posts
    3,715
    My trigger finger is the saftey. I hate manual saftey. Its either off all the time or im using a gun without one like a glock.
    MΟΛΩΝ ΛΑΒΕ

  7. #6
    Senior Member FALover's Avatar
    Join Date
    Feb 2013
    Location
    moved close to the lake.Some call it Gilford.
    Posts
    11,842
    My Beretta 92's safety must be an anomaly. It just flicks up for safe, down for fire and never makes anything difficult.
    GET OFF MY LAWN!

  8. #7
    Senior Member hercster's Avatar
    Join Date
    Mar 2013
    Location
    Ontario
    Posts
    1,281
    I don't see the thumb safety to be at all difficult. With the 1911 it's a quick sweep that becomes second nature either way. My Tanfoglios allow the safety to be operated at any time as do the CZ's where applicable and others including an FNP I owned. For me the safety is also a natural index point for my strong thumb and is part of my grip. All my guns have external safeties and they all follow the up for safe and down for off convention. A mix might create some confusion in the automatic brain but not for long with a practised shooter. Some don't like the grip safety either. It has never been a problem for me from day one and I wouldn't even consider having it pinned.
    NightHawkCustom Pred II 45, NHC .22 upper, Stag Arms AR 15, Rem. Versa Max Tactical 12 Ga. Tanfoglio Ltd Custom Xtreme, an upgraded Tanfo Ltd Pro, Seraphim 1911 .45 ACP Archangel, Seraphim 9mm Warfighter, SIG P320 FS in 9mm with a .40 conversion and now a SIG P226 Enhanced Elite 9mm.

  9. #8
    Member
    Join Date
    May 2015
    Posts
    46
    I just thought of a possible answer for myself, as to why so many guns are like that.

    The striker and firing pin mechanisms are in the bolt or slide. If the manual safety involves a firing-pin block, then something is going to have come up out of the receiver and engage something in the bolt/slide. That will prevent the bolt/slide from moving.

    Not a problem for the Beretta 92, with its slide-mounted safety.
    Last edited by Hardhead; 07-30-2015 at 07:47 AM.

  10. #9
    Senior Member
    Join Date
    Oct 2013
    Posts
    834
    Quote Originally Posted by Steveo9mm View Post
    My trigger finger is the saftey. I hate manual saftey. Its either off all the time or im using a gun without one like a glock.
    My safety is the grey matter that keeps my ears from slamming together. This endangered grey matter controls the trigger finger along with many other functions.
    My thinking is that if a safety mechanism is too complicated for the user, maybe they should have a stick rather than a gun.

  11. The Following 2 Users Like This Post By 50 B.M.G.

    kennymo (07-30-2015), KnowledgeSeeker (12-13-2015)

  12. #10
    Senior Member Mark-II's Avatar
    Join Date
    Mar 2014
    Location
    Winnipeg
    Posts
    6,014
    Well, if your pistol is a 1911 the safety is for carrying it cocked and locked. If it's on then it's assumed that youve already loaded and readied the gun.

    For bolt action rifles I read somewhere that it's to prevent the bolt coming open and possibly falling out of a slung rifle being carried through brush and the like. Also keeps crud out of the action by keeping it closed.

    As above, though - I don't use safeties. Either the gun is loaded and about to be fired, or it is unloaded. If I'm in a situation where a gun must be rendered safe, the ammunition is removed and the action is unlocked.

    If I hunted it would be the same - I'd rather the animal hear me racking the action and bolt, than carry a rifle with one up the spout. That did happen to me once, actually. boo hoo

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •