Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Senior Member
    Join Date
    Sep 2015
    Location
    SWOntario
    Posts
    2,528
    It happen with all brands and types of ammo? Is it reloads or factory?
    "...the brass lip..." It that the case mouth? Is it the top or bottom of the chamber.
    "...starting to have a feeding problem..." The 'starting to' part indicates it is not the magazine walls. Far more likely to be a follower spring issue. Look for crud in the mag well first. Follower springs are flat and can work harden the bends. So look for cracks there too.

  2. #12
    Senior Member DuhBoredShooter's Avatar
    Join Date
    Mar 2018
    Location
    GTA
    Posts
    351
    Quote Originally Posted by Northshore View Post
    Does the bolt cycle nice and smooth by it's self with no rounds in the rifle?
    its cycles ok, its not like glass but its not a mosin lol
    أنا أحب البنادق

  3. #13
    Senior Member DuhBoredShooter's Avatar
    Join Date
    Mar 2018
    Location
    GTA
    Posts
    351
    Quote Originally Posted by Justice View Post
    It happen with all brands and types of ammo? Is it reloads or factory?
    "...the brass lip..." It that the case mouth? Is it the top or bottom of the chamber.
    "...starting to have a feeding problem..." The 'starting to' part indicates it is not the magazine walls. Far more likely to be a follower spring issue. Look for crud in the mag well first. Follower springs are flat and can work harden the bends. So look for cracks there too.
    -Ive only used factory ammo
    -yeah I meant case mouth
    -magwell is clean and the spring looks fine
    أنا أحب البنادق

  4. #14
    Senior Member DuhBoredShooter's Avatar
    Join Date
    Mar 2018
    Location
    GTA
    Posts
    351
    Update:

    I ended up stretching the spring a bit and I filed down the extractor to make it smoother. seems to cycle well enough now but we will see in my upcoming range trip.
    أنا أحب البنادق

  5. The Following 2 Users Like This Post By DuhBoredShooter

    kennymo (08-12-2019), Rory McCanuck (08-12-2019)

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •