There has been a growth in the popularity of pistol calibre carbines and we have you covered at Select Shooting Supplies.

Our current lineup includes:

Freedom Ordnance FX-9 P8 (Restricted)
FROFX9P8__59661.1576609996.jpg

The FX-9 pistol (Freedom Xtreme) has a familiar set of operating controls for the avid AR-15 user it accepts AR-15 stocks and buffer tube assemblies as well as most free-float AR-15 rail assemblies. The FX-9 is machined from billet material anodized type III aluminum components and full hard nitride steel components including the barrel bolt ejector last round hold open feed ramp and extractor for extended wear properties and corrosion resistance.

This 8" version is more maneuverable around barricades during competition but is classified as restricted due to barrel length.

$1049.99 - CLICK HERE FOR DETAILS

Freedom Ordnance FX-9 (Non-Restricted)
FX9.png

The FX-9 carbine (Freedom Xtreme-9mm Carbine) has a familiar set of operating controls for the avid AR-15 user, it accepts AR-15 stocks and buffer tube assemblies, as well as most free float AR-15 rail assemblies.

The FX-9 comes standard with a 10 rd double stack Glock® style 9mm magazine. When we designed the FX-9 our goals were Reliability , Affordability, and familiar controls for the user.

The FX-9 is machined From Billet material, Anodized type III aluminum components and Full hard nitride Steel components including the barrel, bolt, ejector, last round hold open, feed ramp and extractor for extended wear properties and corrosion resistance.

The upper and lower receiver are more than 1.00″ shorter than a standard AR-15 upper and lower receiver making it more compact and lighter than a standard mil-spec AR-15 design

We do not recommend using aftermarket lighter weight triggers, if you wish to try an aftermarket trigger group we recommend keeping your factory supplied trigger group nearby for re-installation as it has more disconnector engagement built into it than a normal mil spec trigger group or after market trigger group.

Features Include:
LIMITED LIFE TIME WARRANTY
Chambered in 9×19
13″ Free float M Lock Rail
6 Position collapsing S3 stock
AR-15 Configured Rear charging handle
AR-15 Configured safety selector
AR-15 Configured last round bolt hold open
AR-15 Configured magazine Release
AR-15 Compatible pistol grips (Without the Rear Tang)
Compatible with 9mm approved 1/2″x 28 T.P.I. muzzle devices and suppressors
Compatible with KNS precision® AR-15 trigger pins.

The FX-9 upholds extreme reliability with a wide range of ammo including many hollow point designs for self defense, full metal jacket and copper plated bullets.

We do not recommend the use of non jacketed/plated ammunition as unprotected lead can cause fouling and buildups that plated and jacketed bullets do not.
Do not use aluminum case ammunition in your FX-9 !!

$1049.99 - CLICK HERE FOR DETAILS

CZ Scorpion EVO 3 S1 Carbine (Non-Restricted)
15201_source_1555440154.png

The Scorpion Carbine builds on the lauded submachine gun platform with a 18.7" barrel fitted with a compensating muzzle brake. Fit with the factory's right-folding adjustable stock, the carbine features a number of US-made parts to make it fully 922(r) compliant. The firearm features a forend covered in M-LOK attachment points to keep the profile slim while still being big enough to swallow most pistol-caliber suppressors should the owner decide to convert it into an SBR for use with a suppressor. Low-profile aluminum fully adjustable aperture and post sights round out the platform with 4 rear aperture sizes, and a top Picatinny rail allows the mounting of a wide number of optics. Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and reach to the trigger is adjustable.

Action: Semi-Automatic
Caliber: 9mm
Barrel Length: 18.7"
Capacity: 5
Trigger: Adjustable
Safety: Ambidextrous
OAL: 36"
Weight: 6.6 lbs
Stock Description: Folding Right Side Adjustable Synthetic
Muzzle: Muzzle Brake
Receiver Material: Polymer
Sights: Adjustable
Finish: Black

$1299.99 - CLICK HERE FOR DETAILS

Sig Sauer MPX Semi Auto Carbine (Restricted)

The SIG Sauer MPX carbine is designed to provide you with a reliable pistol caliber carbine in the most compact package possible. The MPX is completely ambidextrous and makes for the perfect pistol caliber carbine for either left of right handed shooters. You will find a dual sided selector switch, magazine release, changing handle and bolt release. The MPX operates from a fully close and locked rotating bolt for reliability and safety. The Short stroke gas piston system will allow you to run all weights and brands of 9mm ammunition without having to make adjustments. The Free float hand guard is made from high quality aluminum and features a full length picatinny top rail along with KeyMod attachment points.

9mm Luger
16" Barrel
1:10" Twist Rate
Short Stroke Gas Piston System
Full Length Aluminum KeyMod Hand Guard
5 Rounds
Ambidextrous Charging Handle
Collapsible Stock
Mil-Spec Trigger Type
5.5-90lb Trigger Weight
Polymer Pistol Grip
Overall Length 28.5" Collapsed / Extended 33"
Overall Width 2.36"
Overall Height 8"
Overall Weight 7.6lbs
Hard Coat Anodized
Matte Black

$1895.00 - CLICK HERE FOR DETAILS

Ruger PC Carbine (Non-Restricted)

Interchangeable magazine wells for use of common Ruger® and Glock® magazines. Ships with SR-Series Pistol and Security-9® magazine well installed and an additional magazine well accepting Glock® magazines is included*. Ruger American Pistol® magazine well is available at ShopRuger.com.

Easy takedown enables quick separation of the barrel/forend assembly from the action for ease of transportation and storage. Takedown is as simple as locking the bolt back and verifying that the rifle is unloaded, pushing a recessed lever, twisting the subassemblies and pulling them apart.

Dead blow action features a custom tungsten dead blow weight that shortens bolt travel and reduces felt recoil and muzzle rise. Bolt is machined from heat treated, chrome-moly steel to ensure strength, structural integrity and durability.

Reversible magazine release and reversible charging handle to support ambidextrous use or one-handed control manipulation while maintaining a proper firing grip*.

Cold hammer-forged, chrome-moly steel barrel with ultra-precise rifling provides exceptional accuracy, longevity and easy cleaning. The heavy contour barrel provides consistent accuracy, while barrel fluting sheds unnecessary weight and allows for quick handling.

Accurate sighting system with adjustable ghost ring rear aperture sight and non-glare, protected blade front sight.

Soft rubber buttpad with spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three, 1/2'' spacers included).

Durable, glass-filled nylon synthetic stock features sling swivel studs for rapid sling attachment and forward mounted accessory rail to allow for a variety of under-barrel accessories such as lights or lasers. The grip features a proprietary texture for enhanced control.

Light, crisp trigger pull with minimal overtravel and positive reset utilizing proven 10/22® trigger components.

CNC-milled from an aerospace-grade 7075-T6 aluminum billet, the receiver includes an integrated Picatinny rail and is Type III hard-coat anodized for maximum durability.

Also includes: one, SR-Series pistol magazine and hex wrenches for rear sight adjustment, buttpad spacer adjustment and charging handle removal.

$899.00 - CLICK HERE FOR DETAILS

Beretta CX4 Storm (Non-Restricted)

Beretta CX4 Storm - A Tactical Carbine with Pistol-Like Controls

The CX4 is a semi-auto pistol-caliber carbine designed to give you the familiar controls of your favorite Beretta combat handgun. It is perfect for shooters who are already familiar with Beretta tactical pistols, or more in general for those who may not have extensive experience with a rifle or carbine. However, the cold-hammer forged barrel delivers the sort of accuracy that even the most experienced shooters will appreciate.

Easy to use, ultra-reliable and low-recoil, it has been adopted by several police agencies aross the US, while its versatility and accessorization options have made it a favourite of recreational shooters. Whether you use it for home-defense, varminting, competition or training, the CX4 will deliver what it promises.

Accepts Beretta Full-Size Pistol Magazines

The CX4 is adaptable to accept any full-size Beretta 90-series magazines, thereby saving existing Beretta users the expense of additional magazines. Along with its uncompromising Beretta quality, this is an additional reason why the versatility of this carbine is highly prized by tactical shooters. Along with a Beretta pistol, it helps create the best and most versatile tactical system available today, as evidenced by the CX4’s dedicated following.

Extremely Versatile, Easy to Use

This light and compact carbine was designed to be completely and easily adaptable to the needs of most shooters. The operating handle, safety and magazine release are reversible and give you the opportunity to train or shoot right- or left-handed, while case ejection can also be switched from right to left.

The aperture and post sights are user-adjustable, meaning that you can train with (or switch) your favorite brand of ammo without taking the carbine to a gunsmith. And after a day at the range, this carbine is a snap to take apart and reassemble, while its ultra-tough construction and surface treatment make it stand up to the hardest use.

Easy Accessorization

The CX4 just begs to be accessorized. Between the front and rear sights, it features a full-length aluminum top rail for mounting optical and red dot sights. It also sports a retractable Picatinny rail that extends from the fore-end, which allows users to mount tactical lighting devices and other accessories. Additional rails can be mounted on the left, right and bottom, thereby providing ample opportunity for customization.

Specifications:

Caliber: 9mm
Capacity: 10
Action: Semi-Automatic
Operating System: Blowback
Stock: Fixed
Sights: Adjustable Front, Fixed Rear, Top Rail
Barrel: 19" Cold Hammer Forged
Safety: Cross-Bolt
Overall Length: 31.5"
Weight: 90.8 oz.
Comes With:

2x Beretta 92FS Magazines
Magazine Loader
Cleaning Rods
Bore Brush
Bore Mop
2x Side Rail Segments
1x Bottom Rail Segment

$1099.00 - CLICK HERE FOR DETAILS

GSG MP-40 (Restricted)

The submachine gun 40 was produced by Erma and Steyr from 1940 until 1944. The very compact and easy to handle MP40 was build over a million times during this time. Its well known predecessors are the MP36 and the MP38.

The self-loading rifle with blowback in caliber 9mm features a housing and handle made of die-cast zinc, a barrel made of cold-forged special steel, a milled steel breech, a strong extractor claw, an active ejector and a folding rear sight.

Caliber: 9mm
Action: Semi-Auto
Magazine capacity: 5
Weight: 3.720 g
Trigger pool: 3.200 g
Overall length: 625/835 mm
Barrel length: 253 mm / 9.96"
Sight length: 395 mm
Rifling length: 406 mm
Number of grooves: 4
Folding Stock
1 magazine included.

$749.95 - CLICK HERE FOR DETAILS