Results 1 to 8 of 8

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member 2012Cvoguy's Avatar
    Join Date
    Mar 2018
    Location
    Okanagan B.C. & Katy TX
    Posts
    1,909

    Trijjicon & Dawson Precision Stuff..

    May just become a Trijjicon fan, second set of sights now. The tritium sights on the 43 glow very nicely and fit perfectly and now the RMR in the 6.5 MOA configuration. One thing to note, the screws supplied with the RMR are too long for the mos plate configuration and the hardened steel is proper, it took a lot of grunt with my Milwaukee strippers, you will not cut them with your average strippers, the hinged base on the Milwaukees is thick and stout.

    Upon further snooping I did buy Trijjicons sealing plate kit for $14 and it has the proper screw length. While doing said snooping, I discovered Dawson Precision. Found my co-witness tritium irons there, cut for the RMR specifically and a bunch of other stuff of use. Prophet River or someone like Clays operation could probably get stuff if wanted

    https://dawsonprecision.com/


    E85D665E-E6F1-4FF1-A22E-04422905CAFA.jpg71B3811F-92A6-48B5-9236-692594001AD8.jpg

  2. The Following 2 Users Like This Post By 2012Cvoguy

    Aniest (10-17-2022), awndray (10-06-2022)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •