Back when I converted one of my PW’s from 12 to 28 gauge I thought I had done all the adjustments and it was ready to go. Apparently not. After the second station the turret stuck. I knew this was a high primer so I lifted up on the hull and got it to the next station. Thinking it was ready to go I’d filled the turret behind with hulls so I kept going. The wad ram caught the top of the wad on the second next station. I stopped adding hulls and worked my way around lifting hulls and tweaking wad petals. First load looked horrible
A71A4631-D90B-42B4-BFAC-B6031CC1ABEA.jpg
888ABD6B-252D-4187-BF0A-CF61629BE6E9.jpg
From what I read on the digital calliper I’m around.060 high on the primers. The dished crimp is because the wad ram is too low. That was confirmed as i drained shot out of some of the later hulls.
5ED8D3C9-7A32-4F70-843E-8BCF3EA20D7B.jpg
Results 1 to 8 of 8
Thread: 28 Gauge set up
-
12-26-2022, 01:27 PM #1Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
28 Gauge set up
In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
12-26-2022, 01:31 PM #2Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
Here’s what a wad looks like compared to a new one
kmicu5d.jpg
Primer depth is set by removing the primer insertion post.
uQLqu9S.jpg
Depth of the screw on the bottom is .346. Going to add .060 to thatLast edited by R&R Rancher; 12-26-2022 at 02:24 PM.
In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
The Following 3 Users Like This Post By R&R Rancher
Aniest (12-26-2022), Dewey Cox (12-26-2022), Rory McCanuck (12-26-2022)
-
12-26-2022, 01:54 PM #3Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
While it’s off that primer post mechanism felt sticky. Clean up with Hoppes #9 and lube with Hornady one shot
v2b7NtH.jpgLast edited by R&R Rancher; 12-26-2022 at 02:25 PM.
In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
The Following User Liked This Post By R&R Rancher
Aniest (12-26-2022)
-
12-26-2022, 01:54 PM #4The Gunsmithing Moderator
- Join Date
- Apr 2012
- Location
- I live among the creatures of the night (Edmonton)
- Posts
- 23,740
I started messing around with the depth of crimp on mine for buckshot loads. I load absolutely everything with Winchester white wads because thats what I have a ton of. Im having problems with the crimp slowly opening up over time due to the was being a bit too high. I have a lot to learn about this whole shotgun reloading thing.
GOC moderator
Dealer/co-founder/co-owner of Tundra Supply Ltd.
www.tundrasupply.ca
June 2013 - The High River Gun Grab - NEVER FORGET !!!!
Feb 26 2014 - Swiss Arms prohibition and ordered confiscation by the RCMP - NEVER FORGET !!!!!
May 1 2020 - Liberal un-democratic mass prohibition order in council. - NEVER FORGET !!!!!
October 21 2022 - Liberals ban all handgun sales and transfers in Canada via order in council - NEVER FORGET !!!
-
12-26-2022, 02:05 PM #5Senior Member
- Join Date
- Mar 2014
- Location
- Ontario
- Posts
- 85,769
R&R Rancher. Please reupload the last 3 attachments.
-
12-26-2022, 02:11 PM #6Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
Running in single shell mode it looks like my guesstimate on the primer works.
Apparently i can’t any upload any more pics. Don’t know if putting them on Imgur will help, but I’ll give that a try
Crimp is much better. Needs a bit of taper then im ready to go progressive!In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
12-26-2022, 02:19 PM #7Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
They are tenting up because the legs or crush section of the wad is being compressed too much. There’s enough force there to overcome the resistance of the crimp. The solution there is a wad with a shorter crush section. I’ll have to dig around and see what might potentially work for you.
Originally Posted by blacksmithden
Edited to add picture
7AB9BE45-AEB8-4AFB-895C-59D01AE2F525.jpg
Here’s a WAA12, WAA12SL, WAA12L and a WAA12R to illustrate different crush sections
Den, if you can find some WAA12F114 or the Claybuser clone CB1114-12 they are made for 1-1/4 ounce field loads and should solve your tenting issues nicely.Last edited by R&R Rancher; 12-26-2022 at 10:20 PM.
In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
The Following 2 Users Like This Post By R&R Rancher
Aniest (12-27-2022), blacksmithden (12-27-2022)
-
12-26-2022, 10:11 PM #8Senior Member
- Join Date
- Jul 2015
- Location
- Winnipeg
- Posts
- 1,444
And at the end of the evening 500 reloaded and boxed rounds!
ELFym6M.jpg
I’ll pick up where i left off tomorrowLast edited by R&R Rancher; 12-26-2022 at 11:19 PM.
In spite of all of man's grandiose achievements, he owes his continued existence to six inches of topsoil and the fact that it rains.
-
The Following 3 Users Like This Post By R&R Rancher
Aniest (12-27-2022), Rory McCanuck (12-27-2022), Swingerguy (12-27-2022)
Reply With Quote
Posting Permissions
