So we've got about 90% of the baffles and safety ceilings installed in the 50 yard range now, this install was quite the undertaking but overall it went fairly smooth... Our HVAC units and sheet metal infrastructures are now all complete for both ranges as well, the fellas are just working on the air recovery systems now. We chose EngA Engineered Air for our systems, I am really impressed with the equipment, our air quality and efficiency will be pretty incredible.
Gotta love progress...
This is an older picture, all of the middle rows are installed now.
Note the 4 large down feeds that will run into a full width diffuser, this translates to absolute performance and efficiency.
3/8" armour plate safety ceiling, I gotta say it sort-of feels unnatural to stand underneath this ceiling but it is solid, still, very cool.
Results 1 to 10 of 14
-
06-19-2013, 02:45 PM #1Red Deer Shooting Centre
- Join Date
- Apr 2012
- Posts
- 2,520
HVAC, Baffles & Safety Ceilings Installed... [Pictures]
Last edited by 50calshooter; 06-19-2013 at 02:48 PM.
-
06-20-2013, 12:12 AM #2Senior Member
- Join Date
- Apr 2012
- Location
- Chilliwack BC
- Posts
- 8,511
Wow! Very cool to see; I want an armour plated ceiling.
CSSA CCFR
-
06-20-2013, 10:45 AM #3For the low cost of 800$ a sheet I could make you one !
Originally Posted by Strewth
-
06-20-2013, 11:04 AM #4Senior Member
- Join Date
- Apr 2012
- Location
- Chilliwack BC
- Posts
- 8,511
4'x8'? I'd only need two for my purposes...
I think shipping would be the deal breaker....
CSSA CCFR
-
06-20-2013, 12:26 PM #5Stupid, stupid rat creatures!
- Join Date
- Apr 2012
- Location
- Burlington
- Posts
- 259
and polished to a mirror shine.... Originally Posted by Strewth
50cal, are you plating the entire ceiling, or just over the ports and mission critical mechanicals?Skeetgunner
Rifle Director, Webmaster, Burlington Rifle & Revolver Club
The opinions stated in this message are my own, and not those of BRRC unless clearly stated.
-
06-20-2013, 01:23 PM #6Red Deer Shooting Centre
- Join Date
- Apr 2012
- Posts
- 2,520
It's deemed just a safety ceiling over the firing line, so as per NRA standards, there's a 4'x4' foot print directly over each stall/the shooter as well as another 4'x4' foot print just ahead of the stall... If that makes sense... Originally Posted by Skeetgunner
and polished to a mirror shine....
50cal, are you plating the entire ceiling, or just over the ports and mission critical mechanicals?
-
06-20-2013, 01:27 PM #7Red Deer Shooting Centre
- Join Date
- Apr 2012
- Posts
- 2,520
More Pictures...
Complete coverage downrange...
Another double row safety ceiling and baffle reset at the halfway mark downrange...
Our "ANT" baffle or End Baffle... Double row 3/8" AR500 with 3/8" AR500 Strip Joints...
-
06-20-2013, 02:31 PM #8Stupid, stupid rat creatures!
- Join Date
- Apr 2012
- Location
- Burlington
- Posts
- 259
It does make sense, thanks for that tibbit. Originally Posted by 50calshooter
Skeetgunner
Rifle Director, Webmaster, Burlington Rifle & Revolver Club
The opinions stated in this message are my own, and not those of BRRC unless clearly stated.
-
06-20-2013, 02:32 PM #9Owner - Tundra Supply
- Join Date
- Mar 2012
- Location
- Edmonton, Alberta
- Posts
- 3,827
Wow! looks like its coming along great!
Owner - Tundra Supply
-
06-20-2013, 04:21 PM #10Senior Member
- Join Date
- Mar 2013
- Location
- Kamloops, BC
- Posts
- 2,909
Wow! That's a lot of work. Would be nice if people could just shoot their targets instead of the ceiling. That must have added a bit to the build cost!
Reply With Quote
Posting Permissions
