Results 1 to 2 of 2
  1. #1
    EM Precision Rifles stevesummit's Avatar
    Join Date
    Apr 2012
    Location
    spruce grove
    Posts
    3,264

    small vid of my ar 500

    Hello everyone

    I shot one of our ar500 plates with my cheytac last weekend and just wanted to show how well these plates stand up to a 400gr mono solid bullet running at 2950fps, now not wanting to brag but the dimple in the plate was deeper from my cheytac then it was from the 50bmg with 750gr amax at 2650fps. this test was done at 100m with the target solid and taking the full blow from these rounds! now when i say there was a dimple in the plate I will honestly admit there was ! but when we measured it the depth on it was only 7thou deep. Now 7 thou isnt very much considering that the 408 is dumping close to 8000ftlbs of energy into it at that range and the 50 was closer to 11000ftlbs. So I will put this out there that we are looking for someone with a 20 mm to try this plate out ! The video is not edited and a little grainy but the shooting starts at 48 sec in

    If anyone has any questions about this plate feel free to pm me.

    Steve
    Last edited by stevesummit; 08-02-2013 at 08:21 AM.

  2. #2
    EM Precision Rifles stevesummit's Avatar
    Join Date
    Apr 2012
    Location
    spruce grove
    Posts
    3,264
    There is still a couple hours to get in on free shipping !!! Grab them while you can save a few bucks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •