Results 1 to 10 of 14

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-20-2013, 01:23 PM #1
    50calshooter
    50calshooter is offline
    Red Deer Shooting Centre
    Join Date
    Apr 2012
    Posts
    2,520
    Quote Originally Posted by Skeetgunner View Post
    and polished to a mirror shine....

    50cal, are you plating the entire ceiling, or just over the ports and mission critical mechanicals?
    It's deemed just a safety ceiling over the firing line, so as per NRA standards, there's a 4'x4' foot print directly over each stall/the shooter as well as another 4'x4' foot print just ahead of the stall... If that makes sense...
    Reply With Quote Reply With Quote
  2. 06-20-2013, 02:31 PM #2
    Skeetgunner
    Skeetgunner is offline
    Stupid, stupid rat creatures! Skeetgunner's Avatar
    Join Date
    Apr 2012
    Location
    Burlington
    Posts
    259
    Quote Originally Posted by 50calshooter View Post
    It's deemed just a safety ceiling over the firing line, so as per NRA standards, there's a 4'x4' foot print directly over each stall/the shooter as well as another 4'x4' foot print just ahead of the stall... If that makes sense...
    It does make sense, thanks for that tibbit.
    Skeetgunner

    Rifle Director, Webmaster, Burlington Rifle & Revolver Club
    The opinions stated in this message are my own, and not those of BRRC unless clearly stated.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules