Check us out-adapters for m14 stock

J

jv1

www.mandmini14.com
Joined
Jul 22, 2016
Messages
31
Reaction score
0
Points
0
Check us out
we produce adapters for m14 rifle stock , which enables installation of ar 15 stocks and grips of your choice, on the original modified stock(patent pending).
Adapter is made of 6061 aluminum and black anodized.
more info you can find on our web

mandmini14.com

To get better idea of concept itself ,go to "adapters" page and click on"installation instructions".
The price of the adapter is 120$(can)+ tax and shipping

jv1

M&mini14 adapters
[email protected]
 
Welcome to the forum, just curious if you do the work on any of the stocks yourself?
As in, customer sends you his stock, and it comes back with the adapter? Probably be a decent demand for such service.
 
I personally do not do any machining.The shop which produces adapters for me ,cut the stocks for me and than I just applied the epoxy and finished the assembly(I have 20 + years in aircraft maintenance .
Any machining and assembly should be done by gunsmith.
Any work on stock CAN NOT be done by hand or hand held power tools.
If the demand is there I will check the rate for machining of the stocks.More stocks to be machined lower the charge(price ) will be.But as I said I strongly recommend (and my lawyer too)that work and assembly is done by gunsmith.
 
Pictures coming soon....
On the web page mandmini14.com go to "adapters" page and click on "installation instruction" -lots of pictures
jv1
 
Looks good and I don't see any reason why that couldn't be a DIY job, with standard tools - I would feel perfectly capable and comfortable doing that myself, although I understand that you must cover yourself legally.
 
Hi Ed
This was my DIY project and than I came up with this idea.
If you have at least mitre saw and drill press and a lots of experience it is not difficult to cut and drill the stock ,If you use the original stock.
If you buy used stock
it is not just about cutting and drilling the stock- the rifle has to be fitted in to the stock.Mag has to fit properly and trigger assembly has to fit in just right.It is safety issue, it is not "legall"issue.That is a job for an experienced person.
jv1
 
As lone wolf suggested,
I have checked -the cutting and drilling of the stock ,on CNC operated router,will be available.
I have to have mounting fixture made,so it is going to take some time(probably a week or so).
The charge ,I was promised, should be 20$ per stock done.
This way, I am pretty confident that if original rifle stock is used ,installation of adapter can be done right.
jv1
 
FullSizeRender-3.jpgFullSizeRender-2.jpg
 

Attachments

  • IMG_4762.JPG
    IMG_4762.JPG
    131.5 KB · Views: 0
Last edited:
Hi guys
i have some very good news for all of you interested in m14 adapter installed on rifle.Wild west shooting centre has installed one of the adapters on to the m305a(7.62x39) rifle .It is listed on their web page(gun-shop.ca).
jv1m305a wild west.JPG
 
Now these are available from valleyguns.com from Petawawa
contact Jeff Smith
 
I was finally able to get real GI m14 stock.Here are few rough pictures .OMG it fits like a glove.
 
Nice. Now if you had a source for USGI fibreglass stocks to go with...
 
Hi Ben
that is good one
But in all seriousness that was the second thing I did after cutting norinco stock.I got GI fiberglass stock.
First it is more narrow than norinco or wood GI.
gi fiber adapter.JPG
That would not be a problem -my machinist would just make adaapter more narrow,which is more perfect,becouse the adapter would be smaller and ligter.
 
You must log in or register to reply here.
Top Bottom
Back
Forgot your password?
Don't have an account? Register now
or