Tweet
After many hours of design changes and hand filing the Chickopee kits are finally signed off and the parts are on order! Now you can be the first in your club to show off a fine looking rifle you built yourself!
The classic single shot revived. This kit contains all the laser cut parts needed to build Frank DeHaas's Chickopee CF rifle as detailed in his book Mr. Single Shot. It is a simplistic little gun designed to be built from flat stock by the average tinkerer in a home shop with minimal tools. It features 1018 steel construction and laser cut parts with upgraded 0.25" thick sideplates instead of the thinner 3/16 plates called for in the plans. The barrel block included will fit a standard 0.925 Ruger 10/22 barrel or can be threaded to fit most other barrels of suitable caliber. It can be made in rimfire or centrefire based on firing pin placement. Instructions are included in Frank DeHaas's book, Mr. Single Shot, some dimensions differ from mr DeHaas's book but all the parts will fit proportionately
Kit includes:
2x reciever sides
2x breech blocks
2xsupport shoulders
1x trigger
1x hammer
1x release lever
1x hammer block
1x spring block
1x firing pin block
1x breech face
1x extractor blank
1x trigger guard
1x barrel block
1x hinge pin
assorted pins
[IMG]
[/IMG]
Feel free to ask any questions you may have
The classic single shot revived. This kit contains all the laser cut parts needed to build Frank DeHaas's Chickopee CF rifle as detailed in his book Mr. Single Shot. It is a simplistic little gun designed to be built from flat stock by the average tinkerer in a home shop with minimal tools. It features 1018 steel construction and laser cut parts with upgraded 0.25" thick sideplates instead of the thinner 3/16 plates called for in the plans. The barrel block included will fit a standard 0.925 Ruger 10/22 barrel or can be threaded to fit most other barrels of suitable caliber. It can be made in rimfire or centrefire based on firing pin placement. Instructions are included in Frank DeHaas's book, Mr. Single Shot, some dimensions differ from mr DeHaas's book but all the parts will fit proportionately
Kit includes:
2x reciever sides
2x breech blocks
2xsupport shoulders
1x trigger
1x hammer
1x release lever
1x hammer block
1x spring block
1x firing pin block
1x breech face
1x extractor blank
1x trigger guard
1x barrel block
1x hinge pin
assorted pins
[IMG]
[/IMG]Feel free to ask any questions you may have
Comment