BIG THANKS TO MARSHALL, a long overdued post!! loads of goodies

[Strewth]

I would definitely make a post for QC10 when it arrives, Aztech/Marshall is getting a FRT number assigned to it at the moment.
QC10 has small frame lowers for glock 9/40/357 sig, large frame lowers for glock 45, they also have lowers for colt patterned mags. no weird mag block and is the best looking lower around imho.
the lower accepts any AR triggers.
the brake is awesome! unique and effective, it's sitting on my .223 AR and it tames flashes and muzzle jump without ringing your ears love it

Cool, glad to hear the FRT is coming along; we could use more options for 9mm ARs up here. Those Qc lowers do look cool. I thought 9mm ARs needed a different hammer? Am I dating myself?
Glad to hear the brake works, it's hard to choose with all the muzzle device options claiming to do everything these days.

[Familygunnutz]

Cool, glad to hear the FRT is coming along; we could use more options for 9mm ARs up here. Those Qc lowers do look cool. I thought 9mm ARs needed a different hammer? Am I dating myself?
Glad to hear the brake works, it's hard to choose with all the muzzle device options claiming to do everything these days.

as long as you get a ramped 9mm bolt you can use any hammer, if you happened to have a non-ramped bolt then you will need a rounded hammer, or grind down the notch on the hammer, or have the bolt ramped.
ramped bolt is way to go.
also the bolt need to have a glock "cut" for working with glock magazines.
I wanted a brake similar to KAC MAMS without the crazy cost, someone owns a KAC MAMS tried this EFAB and he swears they preformed the same, good enough for me

[Marshall]

Update on the QC10... it was submitted for FRT and rejected due to the fact that it is manufactured with a "low shelf". Meaning it would accept a RDIAS to easily make it a full auto. I then conveyed this information to Quarter Circle 10 and they are now in the process of making some "high shelf" (semi-auto only) versions with different serial numbering for us Canadians. We expect to have the new receivers in hand sometime in June and will resubmit as soon as we have them. In conversations with the Firearms Tech at the CFO it has been indicated that there should be no further delays once we have the issue corrected. And yes, sadly OP is correct... they will be restricted.
As for the EFAB brake... get yours here: http://www.aztecharmory.com/precisio...e-p-26275.html It's available in 7.62 as well. We have full access to all Precision Armament products. They're not all loaded into our catalog yet, but check them out at: http://precisionarmament.com/ Send me a link to whatever you want and we'll get it set up for you to make the purchase through our site.

[Marshall]

Further update on QC10... all approvals are in place and we have some coming on our August import. All are spoken for except one Glock Large Frame receiver, but we're taking orders.

[Familygunnutz]

Further update on QC10... all approvals are in place and we have some coming on our August import. All are spoken for except one Glock Large Frame receiver, but we're taking orders.

the fake suppressor is temporary, acting as a thread protector until I find a suitable good looking 9mm flash hider.
the fake Spike's suppressor is also meant to be slip on over the barrel, but the bull barrel profile is to thick so I just turned it around.

[Foxer]

VERY cool.

[Familygunnutz]

Thanks Marshall!

a Small note from Chris from QC10

"Hello Ben,

Our bolt does not work with the 3 gun triggers from geissele. Most of their triggers simply don't work in these blowback bolts the spring to reset the hammer is far too heavy and the hammer profile does not match up to the ramping of the bolts well. If you're looking for a nice trigger talk to someone at CMC triggers for their 3.5 that I know people are using on these Pistol Caliber Carbines.

Chris
QC10 "

so guys make sure you dont use the geissele triggers when using any 9mm ramped bolts, any milspec or CMC triggers are gtg. oh btw, KIC 33rd mag absolutely DOES NOT work with this lower lol glock factory mags are solid.

[lone-wolf]

I'm not sure I would ever be able to take my hands off that

[Edenchef]

Waiting for my first order from Marshall. It's coming in on the 15 September, import. Should be in my hands by around the 25th. I'll post reviews and photos asap. They have been very good at keeping me "in the loop". Not sure if that is good or bad, but it's certainly keeping my excitement factor up.

[Familygunnutz]

I'm not sure I would ever be able to take my hands off that

she is the new Queen for sure.

[Familygunnutz]

Waiting for my first order from Marshall. It's coming in on the 15 September, import. Should be in my hands by around the 25th. I'll post reviews and photos asap. They have been very good at keeping me "in the loop". Not sure if that is good or bad, but it's certainly keeping my excitement factor up.

Marshall will take good care of you, and the wait will be worth it. I love it, there is always something to look forward to in the mail, it's like Christmas every couple of months lol

[Edenchef]

Marshall will take good care of you, nothing to worry about.

I'm not worried about him at all.

[Edenchef]

Got the email from Carol Ann last night. Transfer is complete, my new toys will be in the mail today. Oooo I'm so excited. Yes, when it involves waiting for new guns.... "men will be boys". Thanks to Marshall, Carol Ann, and all the others behind the scenes at Aztech, first time importing, process was smooth and seamless. I will definitely do this with Aztech again. Pictures will follow.