Tweet
Colt Canada Integrated Upper Receiver (IUR) - 15.7"
CA$1,779.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/...l#.V-qh-5MrKi5
Colt Canada Integrated Upper Receiver (IUR) - 10.5"
CA$1,699.95 + FREE SHIPPING!!!
Pre-Order at: http://www.firearmsoutletcanada.com/...l#.V-qiJpMrKi5
*NEW VERSION*** Colt Canada IUR
Colt Canada British Special Special Forces 3rd Gen Integrated Upper Receiver’s
Production units to ship to British Special Forces in 2017 – THESE ARE NOT SURPLUS OR OVER RUNS*
DESCRIPTION:
- GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
- Made for the British Special Forces
- Interchangeable fit on all Mil-Spec “push pin" lowers
- Fully floating barrel system
- Dry film lubricated bolt carrier channel
- Screw retained (easily maintained) low profile gas block (under the handguard for safety)
- Mil-Spec hard anodized black
- IUR is marked COLT CANADA 2C085 and NATO on the rail
- Straight gas tube to increase life and ease of installation
BARREL:
- Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel
- Canadian Forces Spec thicker chrome
- Phosphated to Mil-Spec
- Improved integral forged carbine chamber
- Colt Canada hammer forged choke bore
- 1/7” twist RH/ 6 groove NATO approved bore
- Batch marked barrel and barrel extension
- High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec
- Anti-corrosion coating applied under the handguards
- New liner to improve thermal protection of hands
FLASH HIDER:
- Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.
RAILS:
- Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom)
- Reinforced grenade launcher recoil lug
- The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
- Rail slots are numbered with laser engraving
- The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories
- Protected low profile gas block
- IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches
BOLT CARRIER ASSEMBLY:
- Full Canadian Forces specification (Military configuration) bolt carrier assembly
- Proof tested, MPI inspected, and lot number controlled bolt
- CF spec high retention staking of the carrier key
- Chrome lined carrier and key for wear resistance
- Chromed firing pin
COLT CANADA TACTICAL CHARGING HANDLE:
- Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place
- Solid latch pin is permanently staked in place for worry free operations
- Mil-Spec finishes applied for weather resistance
COMES WITH with a bolt carrier group or charging handle.
